As a homeowner with a basement or a yard, one must understand how essential it is to prevent drainage water from accumulating in the backyard. It is essential to install the best exterior sump pump in one’s home to prevent water flooding, protect walls and foundations, eliminate excess water, and keep the surroundings dry.
The demand for external sump pumps is increasing tremendously across the world. According to a recent survey, it has been revealed that the commercial pump industry had a market value of 66.68 billion dollars in 2020. Additionally, it is expected to grow at a rate of 3.4% from 2021 to 2027.
This article will briefly enlighten you about what an exterior sump pump is, how it operates, and how you can easily maintain it in your home.
What Is An Exterior Sump Pump?
In simplest terms, a sump pump is an electronic device used to pump excess water out of an area and transport it to a distant location. Such devices are installed in areas usually lower than the ground level—for example, a basement. The device is safely connected to a hose that facilitates transporting water out of one’s house.
The only difference between a standard and an exterior sump pump is that the latter is installed outside one’s house. A hole must be dug out below the frost line of one’s country to install an exterior sump pump. It is also commonly known as a dry well or outdoor sump pump.
How Does A Dry Well Sump Pump Work?
As mentioned, an exterior sump pump is connected to a hose or a pipeline. This pipeline is deeply buried under the ground and is responsible for diverting excess water to a safe location. This pipeline can be set up in two ways. Firstly, one can set up a pipeline to collect the water in one area and then transfer it to a sewer.
Alternatively, one can choose to connect it directly to the end location. Such an end location can be a curb where the water is transferred to the streets and finally to the storm sewer, wetland, low-lying area, or the city sewer system.
The best exterior sump pump ensures efficient relocation of drainage water in emergency events like storms or floods. Additionally, they aid in maintaining the quality of the exterior foundation. Its remarkable quality is that it runs on electricity. Thus, the pump works only when the floater senses a pool of water in the area.
How To Maintain An Outdoor Sump Pump?
Top-quality sump pumps can easily last for around ten years. However, to ensure the durability and functionality of an exterior sump pump, there are a few steps one can take to take proper care of the device.
Check out the various things one can do to ensure the proper functioning of a sump pump.
Installing A Battery Backup System
It is likely to experience a prolonged power cut in emergencies like storms or floods. Since external pumps work solely on electricity, installing a good-quality, durable power backup system is essential. To prevent flooding and accumulation of water pools, one must install a power backup.
Look Out For Unwanted Dirt
Over the years, the accumulation of dirt, debris, or unwanted molds in the drainage system is highly prevalent. Hence, one must check for dirt in clogged hoses or pipelines. Such accumulations can be the cause of pump failure.
Conclusion
Sump pumps are widely popular for safely and effectively directing flooded water to safe locations. One can ensure a well-organized drainage system with the assistance of extra investments like waterproofing tools (drain pipes, dry wells, and french drains). Such a drainage system might be the best choice as it requires minimal maintenance and can effectively drain water from one’s home.
